Skip to main content

Terms of use

These are LITILIT UAB's General Terms and Conditions of Sale (GSC), last updated 2025-12 (REV2025/12). If you have questions about this page, contact us at info@litilit.com.

1. Definitions

The following LITILIT UAB General Terms and Conditions of Sale (the “General Sales Conditions” or “GSC”) apply to all sales and deliveries of the Products and Services by LITILIT UAB or its affiliates (“LITILIT” or “Seller”) to the Customer. Unless otherwise agreed by LITILIT in writing, the legal relations between LITILIT and the Customer are exclusively subject to the conditions set out in these GSC. Unless LITILIT has expressly accepted additional or different terms in writing, LITILIT rejects any terms or conditions of a Customer that are in addition to or in conflict with these GSC and the Purchase Documents; any such additional or conflicting terms are null and void. By ordering Products and Services from the Seller, the Customer confirms that it has read, understood and agrees with the GSC.

1.1. Customer or Buyer means the party to whom LITILIT has made an Offer for sale of its Products and/or Services by sending a Quotation and/or Pro-forma invoice, or with whom LITILIT has otherwise entered into an agreement under which LITILIT is a supplier of Products and/or Services.
1.2. Product(s) means hardware, software and all other goods and works that have been or will be supplied by LITILIT to the Customer according to the quantity, quality and any other specifications described in the particular Purchase document.
1.3. Services means the services provided by LITILIT or by third parties engaged at LITILIT’s discretion, such as consulting, installation, maintenance and training, or other Services as LITILIT may specify.
1.4. Quotation or Offer means an offer made by LITILIT to the Customer in written form, signed (sent) by a person authorised to do so, including any annexes, drawings, specifications or other descriptions of the Products or Services to be provided.
1.5. Purchase Documents means LITILIT’s quotations, order confirmations and invoices, which are always automatically governed by these GSC even where not explicitly referenced, unless LITILIT agrees otherwise in writing.

2. Quotations and orders

2.1. Unless otherwise stated, a Quotation is valid for 45 (forty-five) calendar days. If LITILIT has not received the Customer’s acceptance within this period, the Quotation is no longer valid and LITILIT is under no obligation to honour it.
2.2. All offers of the Seller are non-binding until the Customer places a written order. A contract is concluded only once the Seller has issued a written purchase order confirmation, effected delivery, or performed the Products ordered.
2.3. The Seller is generally under no obligation to verify the correctness of information provided by the Customer, nor to investigate whether executing an order based on that information infringes any third-party property rights.
2.4. The Seller reserves the right to process orders involving partial batches.
2.5. Prices quoted in the Seller’s catalogues, brochures and price lists are subject to change and are not binding. Characteristics and properties of samples are binding only if expressly agreed.
2.6. If a Purchase Document is cancelled for a reason attributable to the Customer, the Customer shall pay a penalty of 50% of the net sales price of the cancelled Purchase Document, without prejudice to any claim for higher actual damages.
2.7. In case of delinquent payment, the Customer shall, in addition to any other remedy of the Supplier, pay 0.3% late payment interest for each day of delay on the amount not paid on time.

3. Prices

3.1. All prices for Products and Services are stated ex works (Incoterms 2020), in addition to transport, insurance, packaging and dispatch, and, for export deliveries, in addition to customs charges, fees and other official duties. Unless otherwise agreed in writing, all prices are exclusive of value added tax, charged at the official rate of the Republic of Lithuania. All bank charges related to the payment of any invoice issued by LITILIT are the Customer’s responsibility; the Customer must ensure the full invoiced amount is received by LITILIT.
3.2. Remuneration is due without any deduction upon delivery or acceptance. The Customer shall pay invoices within 30 (thirty) days of submission, unless another term is agreed in the Purchase document or in writing. Unless otherwise agreed in writing, all invoices for a delivered Product must be paid before the next Product is delivered to the Customer.

4. Characteristics of the Products

4.1. The Customer agrees to indemnify the Seller against all liability arising from the Seller’s performance of the Customer’s order in accordance with characteristics of the Products or Services provided by the Customer, where those characteristics infringe any patent, trade mark, registered design or other intellectual property right not owned by the Customer or the Seller.
4.2. The Seller reserves all copyrights and other intellectual property rights in the Products, drawings, characteristics, patterns, designs, calculations, services, samples, models and other documents it provides. These may not be forwarded to third parties or reproduced or used for other purposes without the Seller’s written consent.
4.3. The Customer shall not disassemble or reverse engineer the Products. Subject to clause 4.2, the Customer may use the drawings and characteristics supplied only to incorporate the Products into its own manufactured products, and to maintain, adjust and repair the Products. The Customer is not granted any licence to use, copy or otherwise reproduce drawings or characteristics of the supplied Products in order to make spare parts for the Products or have them made.

5. Warranty

5.1. The Products are deemed free of defects if they conform to the specifications expressly agreed in writing between the Parties. Any other express or implied warranty for objective or subjective requirements is excluded.
5.2. The Seller warrants, at its own discretion, to repair or replace free of charge (or refund the depreciated price, provided the Customer returns the non-conforming Product at its own cost) any Product found defective due to faulty materials or workmanship within 24 months of shipment (the “warranty period”). This warranty does not apply where Products have been modified or repaired by persons other than the Seller or its authorised technicians, or operated, stored or maintained in violation of the Seller’s recommended conditions of use. The Customer bears any additional costs of defect rectification caused by alteration, improper maintenance or use, or faulty installation or operation. The Seller gives no guarantee of marketability or fitness for a particular purpose unless agreed otherwise in writing; the Customer is solely responsible for checking that the Products are suited to their intended purpose. The warranty is made only to LITILIT’s original Customer and is non-transferable. Replaced or repaired Products or spare parts are warranted only for the remaining unexpired portion of the original warranty period. This clause 5.2 contains the exclusive remedies for any warranty breach; no other remedy, obligation, liability, right or claim, whether in tort, negligence, strict liability or otherwise, is available.
5.3. A defective Product must be sent back to the Seller for repair or replacement at the Customer’s expense. If the defect is approved by the Seller, the Seller bears the cost of returning the repaired or replaced Product using the cheapest shipping method to the location agreed in the Purchase document; if the Customer requests return to a different location, the Customer bears the additional transport cost.
5.4. The Customer must always give the Seller the time and opportunity to examine reported defects, including furnishing the Product for testing, or, if permanently installed, providing access to it; the Seller may, at its discretion, require the Product be sent to it or choose to test/repair on-site. The risk of loss of a Product shipped or delivered to the Seller for repair or replacement is borne by the Customer. If the Customer’s claim of a defect proves unjustified, the Customer reimburses all of the Seller’s costs, including testing and transportation.
5.5. On-site warranty services are available only at the Seller’s discretion. For on-site repairs, where the defect is legitimate, the Customer is not charged for the Seller’s engineer’s labour and spare parts, but must cover all transportation and subsistence costs of the engineer to the site and back, including for the whole stay. Service rendered outside normal working hours may be subject to special rates. The Seller does not bear any cost related to a Customer employee’s on-site visit or any other Customer cost related to the defect.
5.6. The Seller may provide an engineer for an on-site visit for consumables replacement or other non-warranty services; in this case all travel and living expenses, and the engineer’s travel/labour fee and spare parts, are covered by the Customer, even during the warranty period.

6. Delivery

6.1. Delivery of Products follows Ex Works (EXW) rules (Incoterms 2020): Products are made available for pick-up at the Supplier’s facility indicated in the Purchase document, which is where risk and title transfer to the Product occurs.
6.2. The delivery period starts to run only once all issues essential to performance of the contract have been clarified with the Customer and the Customer has performed all essential acts required of it — in particular, once the Seller has received all necessary information from the Customer and, where required, proof of prepayment or security. If the delivery period is interrupted by changes requested by the Customer, the desired changes can be agreed only by cancelling the existing order (due to the Customer’s fault) and the Seller confirming a new order.

7. Liability

7.1. The Seller’s total liability to the Customer is limited to compensation for direct damages caused by the Seller’s fault, which must be proven by the Customer, and is capped at EUR 100,000.
7.2. The Seller is not liable for any special, indirect or consequential loss, including the Customer’s loss of profit, business revenue, goodwill or anticipated savings.
7.3. The Seller is liable only for typically occurring, foreseeable damage incurred by the Buyer due to the Seller’s faulty breach of its contractual duties.
7.4. The Seller is not liable for direct or indirect loss, including loss of use, revenue, savings, profit, interest, goodwill or opportunity, cost of capital, cost of replacement or substitute use or performance, loss of data, claims arising from the Customer’s third-party contracts, or any indirect, special, liquidated, punitive, exemplary, collateral, incidental or consequential damages or other loss or cost resulting from infringement of any intellectual or industrial property right, licence or other right or claim of a third party.
7.5. If the Seller is held liable to a third party for a loss for which LITILIT is not liable under these GSC and the Purchase Documents or otherwise, the Customer shall indemnify the Seller against any such loss, damage, interest and/or other cost incurred by the Seller in that regard.

8. Confidentiality

8.1. All information provided by the Seller to the Customer for performance of the GSC and Purchase Documents, whether tangible or intangible, written, machine-readable, oral or visual, is considered confidential information (“Confidential Information”), unless the Customer proves it was already known to it, lawfully obtained from a third party not bound by secrecy, or has become publicly available through no fault of the Customer.
The Customer shall not, during or after the contract, use or communicate to third parties any Confidential Information of the Seller. It may be shared only with employees or agents of the Customer who need it for their work and who are themselves subject to a corresponding secrecy obligation; the Customer remains fully responsible for any breach by such employees or agents.
8.2. All Confidential Information delivered by the Seller remains the Seller’s property. Nothing in this Agreement grants the Customer any right or licence to any Confidential Information.
8.3. All confidentiality and use restrictions in this clause survive termination of the contract or legal relation between the Parties, for an indefinite period.

9. Proprietary rights

9.1. The sale of Products/Services to the Customer does not confer on the Customer any right, interest or licence in any patents or patent applications, trademarks, service marks, know-how, trade secrets, valuable research or other proprietary rights LITILIT may hold covering the Products/Services. LITILIT retains all proprietary rights in its designs, engineering and manufacturing details and other materials, and all discoveries, inventions, patents and other proprietary rights arising from its work, including the sole right to manufacture any such Products. The Customer warrants that it will not divulge, disclose, distribute or make use of such information, nor manufacture or have such Products manufactured.
9.2. All drawings and other technical documents regarding the Products/Services or their manufacture that LITILIT submits to the Customer remain LITILIT’s property, and may not, without LITILIT’s prior written consent, be used for any purpose other than that for which they were submitted, copied, reproduced, transmitted or otherwise communicated to any third party.

10. End-use of the Products/Services and related policies

10.1. The Customer undertakes to inform the Seller immediately, by e-mail to info@litilit.com, on placing the order or as soon as it has reasonable grounds to believe that the Products/Services supplied may be used in connection with chemical, biological or nuclear weapons or related delivery systems, for a military end-use where the destination is subject to an EU arms embargo, or as parts or components of military items listed in a national military list exported without authorisation, in each case as further defined by Regulation (EU) 2021/821 and related Commission Recommendations (EU) 2019/1318 and (EU) 2021/1700. The Seller may, at its discretion, proceed with, postpone or cancel the order upon such notification, without this being considered a breach of the GSC, and may require the Customer to return affected Products and pay a penalty of up to 100% of the affected contract value, plus any other damages, within 90 days’ notice.
10.2. By placing an order, the Customer certifies that it, its subsidiaries, shareholders, beneficiaries and related persons and its clients/end-users (i) are not subject to International Sanctions (including those of the UN Security Council, EU, Lithuania, US/OFAC, UK or other competent authority) and comply with them, and (ii) are not a Prohibited Party (designated on a sanctions list, owned or controlled by a sanctioned person, established in a sanctioned jurisdiction, dealing in goods prohibited by sanctions, or acting on behalf of such a person). The Customer undertakes to notify the Seller immediately if this certification becomes or may become invalid; the Seller may then, at its discretion, proceed with, postpone or cancel or terminate the order/contract without this being a breach of the GSC, and may require return of affected Products and payment of a penalty of up to 100% of the affected contract value within 90 days’ notice.
10.3. The Customer shall not sell, export, re-export, transfer or otherwise make available any supplied Products, directly or indirectly, to any jurisdiction, entity or individual subject to International Sanctions, and shall use its best efforts, including an adequate monitoring mechanism, to ensure this obligation is not frustrated by resellers, agents or affiliates further down the commercial chain. A violation is a material breach entitling the Seller to terminate the contract and claim a penalty of up to 100% of the affected contract value.
10.4. The Customer acknowledges that the Products and related technical information are subject to export controls, and shall comply strictly with applicable export control laws, including not exporting, re-exporting, diverting or transferring the Products or related technical information to any restricted or prohibited destination, company or person.
10.5. The Customer shall indemnify the Seller for all costs, losses or debts it incurs as a result of any complaint, claim, inspection, investigation or other action relating to an actual or alleged violation of International Sanctions or of the certifications in clauses 10.1–10.4 by the Customer or its related persons. The Customer’s obligations under this clause 10 survive termination or expiry of the contract.

11. Law, jurisdiction

11.1. These GSC and any agreements, rights and obligations between the Seller and the Customer are governed by and construed in accordance with the law of the Republic of Lithuania.
11.2. Any dispute or disagreement between the Customer and LITILIT shall be resolved by the Parties through mutual negotiations. Should negotiations fail, the dispute shall be finally resolved by the competent court of the Republic of Lithuania (venue: Vilnius).

12. Miscellaneous

12.1. Transfer of the Customer’s rights and duties arising from the contract concluded with the Seller requires the Seller’s written consent to be effective.

The full text is also available as a PDF: LITILIT General Terms and Conditions of Sale (PDF).

LITILIT, UAB
Plungės g. 4
Vilnius, Lithuania
info@litilit.com
Phone: +370 611 53788