Skip to main content

Support and service

Service requests, remote help and repair. Our engineers in Vilnius support every laser we ship, together with our distribution partners.

How can we help?

Frequently asked questions.

Does the laser need a chiller or water cooling?

No. The laser head is passively air-cooled and the control unit uses built-in fans, so no chiller or water lines are needed. Indylit 20 is also available with an optional water coldplate. Ask us for the clearances to leave around the head and the control unit.

How long does the laser take to warm up?

Indylit 20 and Indylit 10 need less than 30 minutes from a cold start and less than 5 minutes from a warm start. Indylit 3 needs less than 10 minutes from a cold start. The datasheet of each model gives the details.

How do I return a laser for service?

Send a support request with the serial number. We reply within one working day and start with remote diagnostics. If the laser has to come back to us, we send an RMA number and shipping instructions, and confirm the repair time once we have diagnosed the returned laser.

How do I get software and firmware updates?

Send a support request with the serial number, and we will send the right update and release notes for your laser.

Can you diagnose a problem remotely?

Yes. Send us the serial number and a description of the problem. We reply within one working day and arrange a remote diagnostic session to find the cause and fix it where possible. If it cannot be fixed remotely, the laser comes back to us for repair. For Indylit 20 we ship a replacement laser where possible, to keep disruption to your production low. The repair time depends on the fault and is confirmed once we have diagnosed the returned laser.

What are the operating conditions?

Operating temperature 18–33 °C for Indylit 20 and Indylit 10, and 18–32 °C for Indylit 3, with non-condensing humidity. The datasheet of each model gives the details.

How long is the warranty?

24 months from the date of shipment, under the LITILIT terms of sale.

Do you sell spare parts?

No. If a laser fails, we repair it. Ending production of a model does not end its service: we aim to service every model for its whole lifetime, as far as parts availability and repair options allow.

What is the laser safety class?

Indylit and Biolit 2 lasers are Class 4 under IEC 60825-1; Neolit seeders are Class 3B. The machine it is built into needs a suitable enclosure, interlocks and safety measures, which the integration guide describes.

Do you sign an NDA?

Yes. We respect your confidentiality requirements and can sign a mutual NDA on terms agreed by both sides. To assess whether a laser fits your project we mainly need your technical requirements for the laser, so we usually do not need details of your production or research process.

What is the lead time?

One or two lasers can usually ship from stock in about a week, when they are in stock. For larger orders we agree a delivery schedule with you. The actual lead time depends on current orders and production capacity, so ask our sales team for an exact date.

Is there an integration guide?

Yes. We provide an integration guide and the control command reference for your laser. Request them with the form below.

Request service.

Describe the problem and include the serial number. A support engineer will get back to you.

Urgent production stop?

Call us on +370 669 79833, Monday to Friday, 8:00–17:00 (Vilnius time).

Type of request